Lock out: The worker should place a lockout device, such as a padlock, on the energy-isolating device to prevent it from being accidentally turned on. This should be done for each energy source identified in step 4. Release stored energy: The worker should release any stored energy in the machinery or equipment.
The basic principle of the lockout-tagout procedure is quite simple: The technician performing the maintenance work first shuts down the respective system or machine. Then comes the lockout. More specifically: The technician. The next step is tagout. This is where the technician labels the padlock with.
OSHA, in their standard 1910.147 titled “The Control of Hazardous Energy - Lockout/Tagout”. For our lockout/tagout program to be effective, all employees must understand when performing a lockout/tagout is required. • A lockout/tagout is required anytime your body is exposed to the path of a machine's actions, or if there is a danger from the
Placing a lockout device on an energy-isolating device using an established procedure to make sure the machine or equipment cannot be operated until the lockout device is removed. Lockout device. A device that uses a positive means, such as a key or combination lock, to hold an energy-isolating device in the "safe" or "off" position.
5. The first step in the Lock Out / Tag Out procedure is: A) Release stored energy . B) Shut down equipment . C) Prepare for shutdown D) Apply locks and tags . 6. Locking out the main electrical breaker on a machine eliminates all hazardous energy. A) True . B) False . 7.
Identify the persons who are authorized to lockout the machine or equipment using this Lockout/tagout procedure The following procedures are adapted from OSHA 1910.147 — Control of Hazardous Energy Step 1: The authorized employee will identify the energy source(s) that the machine or equipment uses, understand the hazards of the energy source
. 410 219 788 830 398 726 496 145
lock in lock out procedure
